Non-Explosion Stainless Steel Camera Housing
Product Introduction

YK-CS3825 Bullet Stainless Steel Camera Housing w/ IR LEDs
Function & Features
- Material: SUS316 or 304 Stainless Steel
- Finish treatment: Electrolytic plating or Powder painting ( optional )
- Built-in 6 pcs high brightness IR LEDs whose range about 40 meter
- Can load AHD or IP Camera ( optional )
- Rear connector can be connected with air nozzle and 8-core or 4-core water-proof gland with cable
- External screw or accessory are made of stainless steel
- Operating temperature:-10°C~ +50°C
- Power Input: DC 12V
- Dimension ( not included sunshield ): Ø76mm x 200mm ( L )
- Dimension ( included sunshield ): 250mm ( L ) x 110mm ( W ) x 110mm ( H )
- Application: Highly corrosive or intensive moistured environments, such as chemical plants, oil refineries or salt refineries,,marine side, etc.

YK-MP26 Stainless Steel Camera Housing w/ built-in wiper w/o IR LEDs
Function & Features
- Material: SUS316 or 304 Stainless Steel
- Finish treatment: Electrolytic plating or Powder painting ( Optional )
- Built-in wiper and watering nozzle for cleaning window
- External connector: 1/2" gland screw hole on bottom position
- Can load 2.8m~12mm 2M pixel AHD Camera ( Optional )
- Meet IP68
- Wiper is made of 304 stainless steel, wiper's blade is made of rubber
- Window adopt 5mm tempred glass
- External screw or accessory are made of stainless steel
- Dimension: 400mm ( L )x 145mm ( W ) x 145mm ( H ) included sunshield
- Application: Highly corrosive or intensive moistured, salty environments such as chemical plants, oil refineries or salt refineries, marine side, etc.
- Optional accessory: YK-0336-22 Stainless Steel Bracket Bracket Dimension: 350mm ( L ) x 124mm ( W ) x 100mm ( H )

YK-MP26 Stainless Steel Camera Housing w/ IR LED
Function & Features
- Material: SUS316 or 304 Stainless Steel
- Finish treatment: Electrolytic plating or Powder painting ( Optional )
- Built-in 48pcs high efficient IR LED whose range about 30~50 meter
- External connector: 1/2" or 3/4" NPT gland screw hole on bottom position
- Meet IP68
- Window adopt 5mm tempred glass
- External screw or accessory are made of stainless steel
- Dimension: 400mm ( L )x 145mm ( W ) x 145mm ( H ) included sunshield
- Application: Highly corrosive or intensive moistured, salty environments such as chemical plants, oil refineries or salt refineries, marine side, etc.
- Optional accessory: YK-0336-22 Stainless Steel Bracket. Bracket Dimension: 350mm ( L ) x 124mm ( W ) x 100mm ( H )